Fossils Stuff

- Gravity 180

The Gravity 180 FPV Racing frame has been CNC machined to the highest tolerances from four pieces of HDPE. This frame must be one of the toughest racing frames on the market and comes with an optional Lifetime Frame Warranty* The Gravity 180 has been designed around specific components to keep the frame as compact as possible. Recommended components are as follows:

Naze 32 with ESC connections hard wired

1806 and 2200 series motors with 4” props

Any small 20 amp (2200 motors) or 16 amp (1806 motors) ESC such as Little Bee

CC3D Power Distribution Board or similar (36mm x 36mm)

Skyzone TS5823, Aomway or Luminier VTX

Sony HS1177 FPV Camera

Other components can be used but Fossils Stuff cannot guarantee they will fit without possible modification to the Mainframe or Mid and Top Covers.

Main Features:

FPV camera protection

Motor protection

Accessible VTX dip switches from window in Top Cover

Integrated XT60 connector supplied

Battery protection

Motor ventilation holes

LED rear bumper for 5 programmable LED’s

Naze 32 Rev 5 and Rev 6 USB access

Naze 32 pre-drilled mounting holes

Large airflow slots in motor arms

Machined channels in arms for motor wires

Central COG with 4S 1.5 ah lipo battery

The Top Cover can be easily removed and re-fitted with only 4 x M3 screws allowing quick and easy access to the inside.

Specifications:

Specifications: Material                              HDPE Weight                               147g Size                                    180mm PCD Flight Controller                 Naze32 Rev 5 or 6 or similar Motor Size                         1806 series and 2200 series Maximum battery size        4S 1.5ah

Lifetime Frame Warranty

The Lifetime Frame Warranty covers any part of the frame that has been damaged badly enough to render the frame un-flyable. The damaged part/s will be replaced on return of the warranty certificate and the damaged part/s. The frames will need to be registered with Fossils Stuff either by email or post for the Warranty to be valid. This warranty is valid for the lifetime of the Mainframe, Battery Tray, Mid Cover  and Top Cover. Holes may be drilled in Top Cover for VTX antenna and LED wire route at rear of mainframe. No other modifications may be carried out. The carbon fibre tubes and 45mm bolts retaining the battery tray are not covered under the warranty. Customers are liable for the return postage of new parts.

Fossils Stuff reserve the right to alter the design without notification.