Fossils Stuff

- Gravity 250

The Gravity has been designed around specific components to keep the frame as low as possible. Recommended components are as follows:

Naze 32 with horizontally soldered header pins

1806 series motors with 5” props

DYS BLHeli 20 amp ESC’s

CC3D Power Distribution Board

Skyzone TS5823 VTX

Other components can be used but Fossils Stuff cannot guarantee they will fit without possible modification to the Mainframe or Top Cover.

Main Features:

FPV camera protection

Motor protection

Accessible VTX dip switches from the window in Top Cover

Lipo balance lead socket

Battery strap slots

Rubber battery grip pad included

Motor ventilation holes

LED rear bumper for 8 programmable LED’s

Naze 32 LED indicator window

Naze 32 pre-drilled mounting holes

CC3D PDB pre-drilled holes

Large airflow slots in motor arms

Machined channels in arms for motor wires

Pre-drilled Top Cover for Fossils Stuff Active Tilt Mechanism (ATM)

Central COG with 3S 1.3ah lipo battery

The Top Cover can be easily removed and re-fitted with only 4 x M3 screws allowing quick and easy access to the inside.

Specifications:

Material HDPE

Weight 152g

Size 250mm PCD

Flight Controller Naze32

Motor Size 1806series

Maximum battery size 3S 1.3ah

The Lifetime Frame Warranty* covers either part of the frame that has been damaged badly enough to render the frame un-flyable. The damaged part/s will be replaced on the return of the warranty certificate and the damaged part/s. The frames will need to be registered with Fossils Stuff either by email or post for the Warranty to be valid. This warranty is valid for the lifetime of the Mainframe and Top Cover.

Holes may be drilled in Top Cover for VTX antenna and LED wire route at the rear of the mainframe. No other modifications may be carried out.

Fossils Stuff reserve the right to alter the design without notification.