Fossils Stuff

- S1

Race Results: Date Event Position Pilot

February 2018 DRM                              1st Place Smoky FPV April 2018        Hull FPV Rivals Event   1st Place  Smoky FPV

The S1 has been designed for 5″ Props. Extended arms for the use of 7″ props are available as an accessory.

Included in the fame kit are the following components:

1 x Bottom Plate (2mm thick) 1 x Middle Plate (2mm thick) 1 x Top Plate (2mm thick) 1 x Optional Camera Protection Plate (2mm thick) 5 x Arms (4.5mm thick)

4 x M3 orange anodised aluminium pillars 25mm long 4 x M3 x 10mm socket button head screws (Top Plate fixing) 4 x M3 x 12mm socket button head screws (Inboard Arm fixing) 4 x M3 x 16mm socket button head screws (Outboard Arm fixing) 4 x M3 nyloc nuts 2 x M2 x 8mm cap head bolt (Camera Protection Plate fixing) 2 x M2 plain nut 2 x plain washer 1 x Battery Pad 1 x S1 Sticker

Weight: 68 grams with Camera Protection

Build Notes:

Ensure FC mounting holes are positioned towards the rear of the frame or the camera will foul the FC when tilted at an angle.