The Revo series of carbon fibre FPV racing frames uses a revolutionary rigging system made from state of the art dyneema cord to stiffen the frame arms.
The REVO series of racing frames uses a revolutionary rigging system made from state of the art dyneema cord to stiffen the frame arms. The rigging is tightened using the onboard tensioner, allowing you to tune your frame for optimum performance and strength.
Interchangeable arms give you the flexibility of changing propeller size using the same chassis.
Whatever your preference, the Revo has you covered. Three sizes mean you’ll enjoy the same groundbreaking dynamics whether you enjoy a 180, 210 or a 240.
The unique vertical arm design reduces drag to an absolute minimum. We believe that the airflow leaving the propellers has not been considered fully in current multirotor designs, which has driven us to produce a frame that is aerodynamic in forward flight while reducing the drag under the thrust column to an absolute minimum.
The greatly improved aerodynamics of the thrust column means a more agile platform, improved acceleration and cornering stability but also delivers better efficiency, resulting in increased battery life and a much quieter ride.
This radical design was in development for 8 months, requiring significant pilot testing and several design iterations to ensure appropriate strength and durability for what we believe is an extreme racing machine.
1 x 3mm carbon upper arm
1 x 3mm carbon lower arm
1 x 2mm carbon top plate
1 x 2mm carbon bottom plate
1 x 1mm carbon FC cover
1 x aluminium tensioning post
9 x stainless steel M2 plain washers
8 x black fibre washers
5 x stainless steel M2 x 8mm cap head screws
5 x stainless steel M2 plain nuts
2 x dyneema rigging line
4 x aluminium motor mounts
8 x stainless steel M3 x 10mm button head screws
8 x stainless steel M3 plain nuts
3 x aluminium tapered pillars
1 x aluminium rear pillar
4 x brass standoffs
2 x stainless steel M3 nyloc nuts
2 x stainless steel M3 x 10mm countersunk screws
4 x stainless steel M3 x 12mm countersunk screws
4 x stainless steel M3 x 5mm button head screws
1 x sticker
1 x battery pad
1 x battery strap
All frames have the same specification, the only thing that changes is the arm length.
REVO 4 – 180mm arm length – 4inch props
REVO 5 – 210mm arm length – 5inch props
REVO 6 – 240mm arm length – 6inch props
Choose a size above to compare the sizes (photographs for comparison are from pre-production design with thinner carbon and 3d printed mounts)
Fossils Stuff reserve the right to alter the design without notification.
A true X frame for 5″ props. The FSGX 210 Racing Frame has been CNC machined to the highest tolerances from three pieces of HDPE. This frame must be one of the toughest racing frames on the market and comes with an optional Limited Lifetime Frame Warranty.PRODUCT DETAIL
The Fossils Stuff S1 is Smoky FPV’s signature frame. At the end of 2017, it was clear that the Revo 5 was becoming less competitive although it had had a great season with some incredible results, it seemed that it was just not light enough! Smoky requested a lighter frame and with his valuable input we came up with the S1.PRODUCT DETAIL
The Gravity 250 is Fossils Stuff original High-Density Polyethylene (HDPE) racing frame and the first frame in the UK to be made from this incredibly tough material. Many hundreds of these frames have been sold to date.PRODUCT DETAIL
The Gravity 250-22 was Fossils Stuff evolution of the original Gravity 250. After popular request, the 250 was upgraded to 22** sized motors. The 250-22 is Fossils Stuff best selling frame after the FSGX 210.PRODUCT DETAIL
The key objective in the development of the ALTI Transition, and the core of the product was to offer a highly capable, long endurance, reliable and affordable civil use VTOL (vertical take-off and land) fixed wing aircraft, available to purchase with short lead times of only a few weeks and at an affordable price point when compared with similar a...PRODUCT DETAIL